Welcome to the NeoSurround Development Log. Over the next several weeks we’ll share transparent behind-the-scenes updates on how we’re building, testing, and preparing NeoSurround for the world. This journal will include insights into plastic injection molding, electronics assembly, app integration, certification processes, and everything else that goes into turning a concept into a fully realized […]
Marko Kadunc 
November 14, 2025 
7 min read
Welcome to the NeoSurround Development Log.
Over the next several weeks we’ll share transparent behind-the-scenes updates on how we’re building, testing, and preparing NeoSurround for the world.
This journal will include insights into plastic injection molding, electronics assembly, app integration, certification processes, and everything else that goes into turning a concept into a fully realized product.
We’ll update this page frequently so you can follow our journey in real time.
Marko Kadunc, CEO. For any question you are welcome to write me directly at marko.kadunc AT omnipemf.com
Table of Contents
We are currently completing the last EMC test, focused on radiated emissions. This final EMC measurement is expected to be completed early next week. Once confirmed, the EMC portion of the certification process will be finalized.
In parallel with EMC testing, we have already begun production activities to maintain momentum:
Upper PCB → production started
Lower PCB → still in development and finalization (certification phase)
Whole-body MAT packaging → packaging process started
These parallel steps allow us to move quickly once EMC testing is fully completed.
Upon successful completion of the final EMC test, we will proceed with the remaining production steps and final assembly.
Thank you for your continued patience and support as we approach the final stage of certification and production.
The EMC test conducted on December 8th, 2025 identified minor EMC-related deviations. As a result, a small EMC-specific technical modification is required, followed by a repeat EMC test.
The updated EMC solution has not yet been accepted, as final approval depends on the successful completion of the repeat EMC test. This retest represents the final outstanding step in the certification process.
We are pleased to share another important update on the NeoSurround development process.
The certification body has reviewed the updated redesign and confirmed that all required changes successfully address the issues identified during the previous evaluation. This includes improvements related to EMC stability, shielding, and overall safety margins.
We are now waiting for the last EMC test, which is the final step before full certification approval. Once this EMC validation is confirmed, we will proceed immediately to production.
To save time and accelerate delivery, we have prepared all production components in advance:
Plastic housing → ordered and in final production
Smart labels → fully ready
Coils → already delivered
Electronics → ready for assembly
Packaging → completed
App → finished and ready for release
Everything is staged so that production can begin immediately once EMC approval is received.
As soon as EMC is confirmed, we will move quickly into final assembly and packaging.
We remain on track within the updated delivery window:
December 23rd – January 11th
Thank you for your patience and support as we complete this last certification stage.
Over the past weeks, our engineering and compliance teams have been working closely with the certification authorities to review every technical detail of our devices. During the IEC 60601 medical-grade certification process, the certification body identified a few areas where improvements were required to ensure even higher levels of safety, stability, and electromagnetic performance.
We are pleased to confirm that:
A fully updated PCB and internal system redesign has now been delivered to the certification company.
This redesign addresses all issues identified by the certification authority, including:
electromagnetic susceptibility improvements
optimized safety margins
additional shielding
improved layout spacing
enhanced long-term reliability
These upgrades do not change the functionality of the product — they simply make the device even safer and more robust under medical-grade testing conditions.
We are also completing the necessary steps to register our devices with the U.S. FDA (Food and Drug Administration).
This includes:
device listing
documentation of manufacturing processes
safety and performance records
labeling and compliance alignment
This is an important milestone for both NeoSurround and Roll&Rest, allowing us to ensure full regulatory conformity in the U.S. market.
The updated estimated shipping window is:
December 23rd – January 5th
We will continue to post updates frequently as we progress toward full certification clearance and production start.
Thank you for your patience, trust, and support throughout this final stage of the certification journey.
During the ongoing certification process, SIQ notified us that one section of our PCB required redesign. Their review identified a potential issue related to electromagnetic interference susceptibility in one segment of the control circuitry. While the device operated safely within normal limits, SIQ recommended improving spacing and shielding in that area to ensure maximum stability under all test conditions.
Our engineering team immediately initiated the redesign, updating the layout with improved component separation, optimized grounding paths, and an additional shielding layer to guarantee consistent EMC performance.
This adjustment will cause a small delay in production timelines — approximately 2–3 weeks — but it ensures NeoSurround meets the highest compliance standards and performs reliably in every environment.
Today we completed the production of the metal cups used for directing and intensifying the PEMF output inside NeoSurround. These elements are crucial for shaping the magnetic field and ensuring consistent intensity across the entire 24-hour cycle.
We also finished the latest development and testing phase of the NeoSurround app. The final updates are being integrated, and the app is now entering the last validation stage.
Functionally, it will be very similar to the NeoRhythm app, offering familiar control logic, program selection, and customization — but optimized specifically for room-based PEMF use and NeoSurround’s unique operating cycle.
Everything is now aligned for the next steps toward the December 5 launch.
Today marks the official start of our public development updates.
We are currently finalizing all preparations for injection molding — including mold adjustments, material verification, and final design validations.
In parallel, we’re coordinating assembly workflows and video-guideline production so everything is ready by launch week.
About 21 days ago, we officially started the certification process according to the relevant medical-grade standards.
This includes electromagnetic safety testing, biocompatibility documentation, and the full suite of IEC/EN compliance procedures.
One of the key focuses is IEC 60601, the international standard for the safety and essential performance of medical electrical equipment. We are also preparing documentation for IEC 60601-2 collateral and particular standards, which cover more specific safety and performance requirements depending on device category. These tests evaluate everything from electrical safety and electromagnetic compatibility to temperature limits, leakage currents, and long-term operational reliability.
This step comes after two full years of development, prototyping, redesigns, and verifying the internal magnetic field architecture.
It is one of the most demanding phases of the project — but essential to guarantee that NeoSurround is safe, stable, and ready for widespread use.
On this date, we were also deep in the development of our whole-body PEMF mats, which share several components and design principles with NeoSurround.
Working on these mats helped us validate larger-format coil layouts, thermal management, and durable textile–electronics integration — all of which directly influenced the engineering approach behind NeoSurround.
This early phase allowed us to test field distribution, long-duration operation, and material combinations that later became essential for the final NeoSurround design.
August 14th, we placed the order for the custom-designed copper coils used inside NeoSurround.
These coils are essential for generating precise PEMF fields, and the supplier is currently finishing the final batch.
Their delivery marks one of the earliest major components needed for assembly.
You can pre-order your Neosurround: NeoSurround – pre-sales
Visit our research page: neopemf.com
Your Evenings Deserve Balance Good sleep isn’t just about closing your eyes — it’s a biological process. Your…
NeoSurround Bundle – A New Era of PEMF Innovation Wellness is shifting. We are entering a time when…
How to Get the Most Out of Your NeoSurround Mat Sessions Stress leaves a mark on the body…
